Why Is My Candle Flame So High? (6 Reasons)
Did you know that the height of a candle flame is determined by the quality of the wick? Learn how to make your candle have a beautiful, steady flame.
The candle wick and how it works?
When you light a candle, the heat of the flame melts the wax near the wick. This liquid wax is then drawn up the wick by capillary action. The heat of the flame vaporizes the liquid wax (turns it into a hot gas) and starts to break down the hydrocarbons into molecules of hydrogen and carbon.
These vaporized molecules are drawn up into the flame, where they react with oxygen from the air to create heat, light, water vapor (H2O), and carbon dioxide (CO2). The height of the candle flame is determined by how much oxygen is available for the combustion reaction.
If there is plenty of oxygen, the flame will be tall and blue. If there is not enough oxygen, the flame will be short and yellow. You can adjust the height of your candle flame by trimming the wick. If the flame is too high, blow it out and trim off about 1/4 inch of the wick.
If the flame is too low, trim off any blackened or charred parts of the wick. The diameter of the candle flame is also determined by how much oxygen is available. If there is plenty of oxygen, the flame will be hot and small.
If there is not enough oxygen, the flame will be cooler and larger. You can adjust the diameter of your candle flame by blowing on it. If the flame is too small, blow gently on it until it gets bigger. If the flame is too big, blow out the candle and trim off a little bit of the wick before relighting it.
The color of the candle flame is determined by the temperature of the flame. The hotter the flame, the bluer it will be. The cooler the flame, the more yellow it will be. The shape of the candle flame is also determined by the temperature of the flame. If the flame is too hot, it will be pointy and sharp. If the flame is too cool, it will be droopy and rounded.
6 Reasons why your candle flame is so High
If you’ve ever wondered why your candle flame is so high, you’re not alone. Many people don’t realize that there are a few reasons why this could be happening.
1. The type of wax you’re using: If you’re using a wax that has a high melting point, it will likely have a higher flame. This is because the heat from the flame melts the wax more slowly, allowing the flame to be taller.
2. The size of the wick: A larger wick will generally produce a taller flame. This is because there is more fuel for the flame to consume.
3. The type of fuel you’re using: Different fuels will produce different flames. For example, candles made with beeswax will generally have taller flames than those made with paraffin wax. This is because beeswax has a lower melting point and burns more slowly than paraffin wax.
4. The air temperature: Warm air can cause the candle flame to be taller than it would be in cooler air. This is because warm air helps to vaporize the liquid wax, which then feeds the flame.
5. The wind: A breeze can cause the candle flame to waver and appear taller than it is. This is because the flame is constantly being disturbed by the movement of air.
6. The humidity: High humidity can cause the candle flame to appear taller than it is. This is because the water in the air can vaporize the liquid wax, which then feeds the flame.
Is a high candle flame all that bad?
A high candle flame is not necessarily a bad thing. There are many benefits to having a high candle flame. For one, it allows the candle to burn for a longer period, which is ideal if you want your candle to last through the night. Additionally, a high flame can provide a more intense and relaxing ambiance.
However, some potential dangers come with having a high candle flame. If the flame is too high, it can cause the wax to melt too quickly, which can result in the candle dripping or even exploding. Additionally, a high flame can also be a fire hazard if not properly monitored.
Thus, it is important to be aware of both the benefits and potential dangers of having a high candle flame before deciding on whether or not to use one.
What is the Ideal candle flame height?
The perfect candle flame height is achieved when the wick is trimmed to the right length. If your candle flame is too high, it can cause the wax to melt too quickly and produce soot. If your candle flame is too low, it can cause the wax to pool around the wick and extinguish the flame. The ideal candle flame height is about 1 inch.
How to fix a wick that is too high?
Short candle wicks might have two different causes: ones that are out of your control and ones that are under your control.
1.The first category typically pertains to the process of making the candle.
If your candle wick is drowning, it’s possible that it’s either too small for the candle container or that the wick is of poor quality. Because of this, the wick “drowns” in its wax pool and burns too quickly. The wick might be too short to relight or even totally buried inside as the surrounding wax cools and hardens once again.
2. The second kind of causation has to do with how the candle was lit. The good news is that not only can it be fixed, but it can also never happen again.
Have you forgotten to cut the wick? As the wick burns, trimming keeps it from curling and “mushrooming,” which is a crucial aspect of candle maintenance. The wick could coil up or fall into the wax pool and become buried if it isn’t cut once every three to four hours to maintain a decent length and form.
Solutions:
If your candle flame is too high, it’s likely because the wick is too long. Trim the wick down to 1/4 inch using a wick trimmer or scissors. If the problem persists, try moving the wick holder up higher on the candle.
You could now and then experience an issue with the wick becoming buried or too short when savoring exquisitely scented luxury candles. It could be challenging to ignite (or relight) the candle if that occurs. But don’t be alarmed; we can resolve this.
Wicks of candles can become overly short for a variety of reasons. It may be a problem with the wick’s size or quality sometimes, or it may be that you trimmed it too short or not enough.
Where does the wax go when you burn a candle?
When you light a candle, the heat of the flame melts the wax near the wick. This liquid wax is then drawn up the wick by capillary action. The heat of the flame vaporizes the liquid wax (turns it into a hot gas) and starts to break down the hydrocarbons into molecules of hydrogen and carbon.
These vaporized molecules are drawn up into the flame, where they react with oxygen from the air to create heat, light, water vapor (H2O), and carbon dioxide (CO2). So, when you burn a candle, the wax is vaporized and turned into gas. The gas then reacts with the oxygen in the air to create heat, light, water vapor, and carbon dioxide.
Can I let a candle burn overnight?
No, you should not let a candle burn overnight. Doing so could cause a fire.
When using candles, it is important to practice safe burning habits. You should always keep an eye on the candle and make sure it is extinguished before leaving the room or going to sleep.
Conclusion
If you’re wondering why your candle flame is so high, it’s likely because the wick isn’t trimmed properly. Make sure to trim the wick before each use to prevent it from getting too long and causing a high flame.
If you follow these steps, you should be able to achieve the perfect wick for your candles!
