How To Get Candle Wax Out Of Carpet, Clothes, And More In 10 Easy Steps?
If you’ve ever accidentally spilled candle wax on a surface you didn’t know how to clean, you were probably cursing and wondering if there was any way to get the wax out. The answer is yes – with 10 easy steps!
1. Harden the Wax
The first step to getting candle wax out of anything is to harden the wax. You can do this by putting a piece of ice on the wax and letting it sit for a few minutes. The cold will harden the wax and make it easier to remove.
Once the wax is hardened, you can start to remove it. For the carpet, you will want to use a putty knife or something similar to scrape the wax off of the carpet. For clothing, you can try using a blunt knife or your fingernails to peel the wax off.
Once you have removed as much of the wax as possible, you can clean up any remaining residue with a damp cloth.
2. Prevent Wax from Getting on Surfaces
The best way to prevent wax from getting on surfaces is to be careful when you are using candles. Make sure that you do not put candles near anything that can catch fire, such as curtains or furniture.
Also, be sure to put candles on heat-resistant surfaces, such as a plate or a candle holder. This will help to prevent the wax from melting and getting onto surfaces.
3. Remove the Wax
- Remove the wax: The first step is to remove as much of the wax as possible. If the wax is on a carpet, you can use a vacuum cleaner to suck it up. If the wax is on clothing, you can try using a hairdryer to melt it and then scrape it off with a blunt knife. If the wax is on furniture, you can use a credit card or a blunt knife to scrape it off.
- Apply heat: The next step is to apply heat to the remaining wax. This will help to melt it so that it can be removed more easily. You can use a hairdryer, an iron, or a warm towel to apply heat.
- Remove the wax: Once the wax has melted, you can remove it with a paper towel or a cloth. You may need to repeat steps 2 and 3 several times before all of the wax is removed.
- Clean the area: Once all of the wax has been removed, you should clean the area with soap and water. This will remove any residue that may be left behind.
4. Apply WD 40
If you have a candle wax stain on your carpet, clothes, or any other fabric, the first thing you need to do is treat the stain. This can be done by using a hairdryer to heat the wax. Once the wax is heated up, it will be easier to remove.
Another way to treat the stain is to place a piece of brown paper over the wax and then run a hot iron over it. The heat from the iron will melt the wax and transfer it to the paper. You can then peel the paper away from the fabric to remove the wax.
If the stain is still visible after treating it, you can try using a solvent like rubbing alcohol or WD-Apply the solvent to a cloth and dab it onto the stain. Be sure to test the solvent on an inconspicuous area of the fabric first to make sure it won’t damage it.
5. Wash the Garment
Wash the garment in the washing machine using the hottest water temperature that is safe for the fabric. Add a laundry booster to the wash cycle.
If the wax stain is still visible, lay the garment flat on an ironing board. Cover the stain with a clean cotton cloth. Apply a medium-hot iron to the cloth for 30-60 seconds, moving the iron back and forth over the stain.
Check the garment to see if the wax has transferred to the cloth. If so, repeat steps 2-3 until the stain is gone.
If the stain is still visible, apply a pre-treater to the area and launder again using the hottest water temperature that is safe for the fabric.
6. Check the Stained Area
Before you start trying to remove the wax, it’s important to check the stained area. If the wax is on a delicate fabric, you’ll want to be careful not to damage it. You should also make sure that the area is large enough to work with. If the wax is on a small area, you may be able to remove it with a razor blade.
- Apply Heat
- One of the easiest ways to remove candle wax is by applying heat. You can use a hair dryer or a heat gun to melt the wax. Once the wax is melted, it will be much easier to remove.
- If you don’t have a hair dryer or heat gun, you can try using ice. Put an ice cube on the wax and let it sit for a few minutes. Once the wax is hard, you should be able to scrape it off with a razor blade.
- WD-40 is another effective way to remove candle wax. Simply spray some WD-40 on the wax and let it sit for a few minutes. Then, wipe away the wax with a clean cloth.
7. Treat Any Dye Stain
If the wax has dye in it, you’ll need to treat the stain before proceeding. If the wax is on clothing, pre-treat the area with a stain remover or laundry detergent. If the wax is on the carpet, use a carpet cleaner or spot cleaner that’s designed for removing stains.
8. Heat and absorb the wax
- Use a hairdryer to heat the wax on the carpet.
- Use a paper towel or clean cloth to absorb the melted wax.
- Repeat steps 1 and 2 until all of the wax has been removed from the carpet.
- Vacuum the area to remove any wax residue.
9. Vacuum the carpet
The first step to getting wax out of your carpet is to vacuum it. This will help to remove any loose wax particles from the surface of the carpet. If the wax is on a small area of the carpet, you can use a handheld vacuum. If the wax is on a large area of the carpet, you can use a regular vacuum cleaner.
After you have vacuumed the carpet, you will need to identify the type of wax that is on the carpet. There are two main types of wax: paraffin wax and petroleum jelly. Paraffin wax is often used in candles. Petroleum jelly is often used in lip balms and lotions.
If the wax on your carpet is paraffin wax, you can remove it by using a hairdryer. Set the hairdryer to the hottest setting and hold it close to the wax. The heat from the hairdryer will melt the wax and allow you to wipe it up with a paper towel.
If the wax on your carpet is petroleum jelly, you can remove it by using an ice cube. Rub the ice cube over the petroleum jelly until it hardens. Once it hardens, you can scrape it up with a spoon
10. Iron the carpet
If you have wax on your carpet, there’s no need to panic. There are several simple steps you can take to remove the wax and get your carpet looking good as new.
The first step is to iron the carpet. This will help to melt the wax and make it easier to remove. Place a clean cloth over the wax stain and then run a hot iron over it. be sure to move the iron around so that you don’t burn the carpet.
Once the wax is melted, you can use a knife or a credit card to scrape it off the surface of the carpet. Once all of the wax is removed, you can vacuum the area to pick up any remaining bits.
If there is a stubborn stain remaining, you can treat it with a carpet cleaner or Stain remover. Just follow the instructions on the product and blot the stain until it disappears.
With just a little effort, you can easily remove wax from your carpet and get it looking like new again.